Products List

Dillon BL 550 Basic Press
Upgradeable to RL550B
Image shows Press with Optional Stand & Accessories

Dillon's description of this item:
The BL 550 is essentially an RL550B without the automatic priming and powder systems. Capable of loading more than 160 calibers- just like the RL550B- it uses any manufacturers' standard 7/8"-14 reloading dies. It's priced comparably with other manufacturers' turret presses; yet unlike them, it's fully upgradeable to Dillon's Progressive RL550B loader!
The interchangeable toolhead makes it quick, easy and inexpensive to change calibers. For example, if you load 30-06 for elk, .243 for deer and .22-250 for coyote, you don't even have to change the shellplate. You simply pull two pins and swap the toolhead with your 30-06 dies to another toolhead with your .22-250 or .243 dies in less than 30 seconds! The additional toolheads are inexpensive- if you load for several rifles it's a no-brainer! Once you get your dies set you'll never have to re-set them.
A powder measure adapter is available if you want to use a manual measure that you already own. Or, if you want to weigh every powder charge you load, it's easy- you can use a powder trickler with the powder die/ funnel assembly that comes with the BL550.

List Price: ~~$649.95~~

Price: $629.95

566.96 AUD

Dillon RL550C Press

Dillon RL550C Press
Latest 550 Design
Requires Conversion Kit & Dies in Your Caliber
Image Shows Optional Extras - Not Included
Part #14261

Included: Machine with 1 Toolhead, Straight Operating Handle, Small & Large Powder bars, Powder Bar Spacer, Spent Primer Cup and Slide Assembly, Cartridge Collection Bin, Primer Tubes, Powder Measure Failsafe & Instruction Manual.

Note: Image shows the RL550C press with the following optional extras - Strong Mount, Bullet Tray, Plastic Roller Handle & Low Powder Alarm.

Optional Extras Available:
Instructional DVD, Roller Handle (Plastic or Alloy), Strong Mount, Bullet Tray, Empty Case Bin, Low Powder Alarm, Extra Small Powder Bar, Magnum Powder Bar, Belted Magnum Powder System, Extra Primer Pick Up Tubes, Machine Cover, Conversion Kits, Extra Toolheads, Powder Die, Case Feed Kit, Electric Case Feeder.

Dillon's description of this item:
4 station progressive loader
Station 1) resize/deprime/prime
Station 2) powder drop/flare
Station 3) seat
Station 4) crimp
The RL550C is able to load rifle as well as pistol cartridges The RL550C uses standard 7/8 by 14 thread per inch dies, as long as they deprime in the size die Manually indexed shellplate Manually fed cases and bullets Capable of loading 400 to 600 rounds per hour
Lifetime "No-B.S." Manufacturers Warranty

List Price: ~~$1,049.95~~

Price: $999.95

899.96 AUD

Dillon Super 1050 Press - 9mm

List Price: ~~$3,799.95~~

Price: $3,599.95

3,239.96 AUD

Out of Stock

Dillon XL650 Press

$150 off! You'll never see these prices again.

Note: these come fitted with a calibre. Saves $180 over the bare press.

Dillon XL650 Press
Conversion Kit Installed (select required caliber from menu below)
Requires Dies (Any standard dies will fit)

5 station progressive loader
Station 1) resize/deprime
Station 2) powder drop/flare
Station 3) powder check
Station 4) seat
Station 5) crimp
Mechanically indexed shellplate
Mechanically inserted cases, manually fed bullets.
Casefeed tube to automatically insert cases.
Capable of loading 500 to 800+ rounds per hour
Lifetime Dillon "No-B.S." Warranty

Included:
XL650 Machine with Toolhead, Powder Measure with Small & Large Powder Bars, Spare Parts Storage Box, Prime System with Small & Large Priming Parts, Loaded Case Bin, One Caliber Conversion Kit Installed, Straight Handle, Case Feed Tubes, Powder Measure Failsafe, Wrench set, Instructions.

Image shows some option extras (not included).

Optional Extras Available:
Instructional DVD, Roller Handle (Plastic or Alloy), Strong Mount, Bullet Tray, Empty Case Bin, Low Powder Alarm, Extra Small Powder Bar, Magnum Powder Bar, Belted Magnum Powder System, Extra Primer Pick Up Tubes, Machine Cover, Other Conversion Kits, Extra Toolheads, Powder Die, Case Feed Kit, Electric Case Feeder.

Caliber:

List Price: ~~$1,499.95~~

Price: $1,299.95

1,169.96 AUD

Dillon XL750 Press 9mm

Note: these come fitted with a calibre. Saves $180 over the bare press.

Dillon XL750 Press
9mm
Requires Dies (Any standard dies will fit)

5 station progressive loader
Station 1) resize/deprime
Station 2) powder drop/flare
Station 3) powder check
Station 4) seat
Station 5) crimp
Mechanically indexed shellplate
Mechanically inserted cases, manually fed bullets.
Casefeed tube to automatically insert cases.
Capable of loading 500 to 800+ rounds per hour
Lifetime Dillon "No-B.S." Warranty

Included:
XL750 Machine with Toolhead, Powder Measure with Small & Large Powder Bars, Spare Parts Storage Box, Prime System with Small & Large Priming Parts, Loaded Case Bin, One Caliber Conversion Kit Installed, Straight Handle, Case Feed Tubes, Powder Measure Failsafe, Wrench set, Instructions.

Image shows some option extras (not included).

Optional Extras Available:
Instructional DVD, Roller Handle (Plastic or Alloy), Strong Mount, Bullet Tray, Empty Case Bin, Low Powder Alarm, Extra Small Powder Bar, Magnum Powder Bar, Belted Magnum Powder System, Extra Primer Pick Up Tubes, Machine Cover, Other Conversion Kits, Extra Toolheads, Powder Die, Case Feed Kit, Electric Case Feeder.

List Price: ~~$1,549.95~~

Price: $1,449.95

1,304.96 AUD

Forster Co-Ax Press

List Price: ~~$869.95~~

Price: $829.95

746.96 AUD

Frankford Arsenal M-Press

Heavy duty service.
Center mounted handle on top provides more leverage, allowing even the most stubborn case to be resized with ease.
Cast iron construction and dual guide rods ensure consistent results.
Free floating design allows the die and shellplate to move on two axis, so the case is always perfectly centered in the die, minimizing bullet runout.
Generous frame opening and ram stroke accommodate even the largest magnum cases.
Three included die blocks (more available separately) let you change dies with ease, quickly changing from resizing to seating or crimping operations in seconds.
Each die block features a lock screw to ensure the die returns to the proper setting each time.
Spent primer collection system ensures your workspace stays clean.
Press also features an integrated LED light to make it easy to see what you are doing.

Features

Easy-to-adjust integral "floating" shell-holder plate system
Includes 3 die blocks for quick change of reloading dies
Robust design requires little effort to size brass
Two parallel guide rods for stability
Integrated LED light to see work area
Ambidextrous handle location

List Price: ~~$749.95~~

Price: $699.99

629.99 AUD

Hornady Iron Press

List Price: ~~$679.95~~

Price: $559.95

503.96 AUD

« Previous | 1 | 2 | 3 | 4 | 5 | Next »