We accept Visa and MasterCard
Pay by Direct Credit (NZ only)


Products List

 

Home » Gunsmithing + » Torque Wrenches

  Checkout

AR-15/M16 Barrel Extension Torque Tool
AR-15/M16 Barrel Extension Torque Tool

 
  • AR15/M16 Barrel Extension Torque Tool
  • Applies Straight-Line Torque for Easy Barrel Nut Installation
  • Does Not Scratch Exterior of Upper Receiver
  • Helps Apply Even Amount of Torque
  • Maintains Propper Alignment with Barrel
  • Use with Any Barrel Nut Wrench
  • Made for Brownells USA
  • Part #080-000-637

Brownells Description:
Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the AR15/M16 and 308 AR.
List Price: $139.95
Price: $129.95
116.96 AUD
Add to cart
AR-308 Barrel Extension Torque Tool
AR-308 Barrel Extension Torque Tool

 
  • AR-308 Barrel Extension Torque Tool
  • Applies Straight-Line Torque for Easy Barrel Nut Installation
  • Does Not Scratch Exterior of Upper Receiver
  • Helps Apply Even Amount of Torque
  • Maintains Propper Alignment with Barrel
  • Use with Any Barrel Nut Wrench
  • Made for Brownells USA

Brownells Description:
Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the barrel extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. Available for the AR15/M16 and 308 AR.
List Price: $159.95
Price: $149.95
134.96 AUD
Add to cart
Brownells Multi-Torque Driver Kit - MG15
Brownells Multi-Torque Driver Kit - MG15

 
  • Brownells Multi-Torque Driver Kit MG15
  • 16 Torque Settings Including the Following:
  • 12, 15, 18 , 22, 25,  28, 35, 45, 65, 75 & 85  inch/pounds
  • 15 Piece Chrome Plated Driver Set Including the Following:
  • 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 3mm, 4mm & 5mm Hex
  • T10, T15, T20, T25 & T30 Torx plus 1/4" Hex to 1/4" Square
  • Made for Brownells by Borka Tools
  • Brownells Paert #080-001-087
List Price: $329.95
Price: $299.95
269.96 AUD
Add to cart
Magna-Tip Preset Torque Driver - 45"/lb
Magna-Tip Preset Torque Driver - 45"/lb

 

  • Magna-Tip Torque Driver
  • Preset at 45 Inch Pounds
  • Accurate & Repeatable
  • No Settings to Change
  • Comes in Hard Plastic Case
  • Made for Brownells USA
  • Part #080-000-643

Brownells Description:
Every time you reach for one of these drivers, you’ll be able to apply the exact amount of tightening force you need consistently and repeatably—no adjustments, no settings to change. Available in 15, 25, 35, and 45 in.-lb. settings, this driver features a self-limiting clutch that stops tightening when the preset torque level is reached. Prevents over-tightening that causes stripped threads, broken-off screw heads, and other damage that comes from applying too much force. Perfect for high-volume, frequently performed tasks where you need to apply the same torque force over and over again. The hardened stainless steel shank transmits all the energy evenly to the screw, while the magnetic bit socket accepts any Magna-Tip bit we sell. Tear-drop shaped polymer handle with rubberized gripping surface ensures a comfortable, consistent grasp.
List Price: $99.95
Price: $88.95
80.06 AUD
Add to cart
Magna-Tip Preset Torque Driver -15"/lb
Magna-Tip Preset Torque Driver -15"/lb

 
  • Magna-Tip Torque Driver
  • Preset at 15 Inch Pounds
  • Accurate & Repeatable
  • No Settings to Change
  • Comes in Hard Plastic Case
  • Made for Brownells USA

Brownells Description:
Every time you reach for one of these drivers, you’ll be able to apply the exact amount of tightening force you need consistently and repeatably—no adjustments, no settings to change. Available in 15, 25, 35, and 45 in.-lb. settings, this driver features a self-limiting clutch that stops tightening when the preset torque level is reached. Prevents over-tightening that causes stripped threads, broken-off screw heads, and other damage that comes from applying too much force. Perfect for high-volume, frequently performed tasks where you need to apply the same torque force over and over again. The hardened stainless steel shank transmits all the energy evenly to the screw, while the magnetic bit socket accepts any Magna-Tip bit we sell. Tear-drop shaped polymer handle with rubberized gripping surface ensures a comfortable, consistent grasp.
List Price: $79.95
Price: $69.95
62.96 AUD
Add to cart
 
Wheeler Digital "FAT" Wrench

 
 
List Price: $219.95
Price: $204.95
184.46 AUD
Out of Stock
Wheeler Engineering AR-15 Combo Tool + Torque Wrench
Wheeler Engineering AR-15 Combo Tool + Torque Wrench

 
  • Delta Series AR-15 Combo Tool with Torque Wrench
  • One Tool Covers Most AR-15 Service Needs
  • Hardened Steel Barrel Nut Pins
  • Profiles for 1/2" Hex Nut & Fixed Stock Buffer Tube
  • Functional Bit Driver with 6 Common Bits
  • Torque Wrench  to 120 ft/lbs (10 ft/lb increments)
  • Excellent Value Tool
  • Part #156700
List Price: $126.95
Price: $109.95
98.96 AUD
Add to cart
Wheeler Engineering Firearm Accurizing Torque Wrench (F.A.T.)
Wheeler Engineering Firearm Accurizing Torque Wrench (F.A.T.)

 
The F.A.T. Wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws, windage screws, base screws & other  firearm screws which aids in accuracy and decreases the opportunity for problems in the field.

Contains F.A.T.,  9 bits,  plus square drive adaptor bit.
Wheeler Part #553-556
List Price: $164.95
Price: $149.95
134.96 AUD
Add to cart



Website by Webfactor Limited, Dunedin, N.Z.